 |
| Let's be Creative |
At the imagemagick studio, make a white (or color of your choice) background of size
Go to composite and put the url of this clipart in the slot
 |
| Green Umbrella Source:cleker.com |
Change the gravity to west and press composite.
Now go to transform at the top and click on the flip radio button. Press transform. The image will
be on the left side. Go to composite again, leave everything as default, and press composite.
Image should look this.
To draw line over and under the umbrellas, grab a pen and paper.
Point the cursor over the umbrella on right side from where you want to start your line. Right
click on your mouse. You will see two numbers in the blue box. Note down them. Mine are 119,
68. Repeat the same procedure with the left hand side umbrella. My numbers were 340 and 68.
Now follow the above steps at the handles of the umbrella (lower part). Place the cursor over
where your line to start (from right) and end (on left). My numbers were 84, 170 for the right side
and 378 and 170 for the left side of the umbrella.
Now follow the above steps at the handles of the umbrella (lower part). Place the cursor over
where your line to start (from right) and end (on left). My numbers were 84, 170 for the right side
and 378 and 170 for the left side of the umbrella.
Go to Draw and type in the number you found to draw the first line in the following manner
119+68 340+68. Select Line from Primitive. Type the color name you want I used gray in the fill
color box with the stoke width 2. Notice the last number 68 is same for sides. Here is what your
line should looks like
Now for the line at the bottom repeat the above procedure. I typed my numbers for the line as
follows. 84+163 375+163. Again the last number 163 is same for both sides.
I left everything same and pressed draw . Here is the final image
If you want you can annotate in it now.
More samples of the same tute:
 |
| Happy Spring Clipart: Ladys Mantle |
 |
Happy Halloween
Clipart: Jack O Lantern
|
0 comments:
Post a Comment